SUPERTA H beds, like all our beds, are distinguished by their professional workmanship down to the last detail.
The main advantage of these beds is above all its independence from electricity. SUPERTA H beds offer a wide range of options and modifications, which allows the bed to be produced according to the customer's needs.
Hydraulic lifting of the mattress platform
The mattress platform height is controlled by foot pedals accessible from both sides of the bed. The increased range of the bed surface height reduces the effort for the attending staff when caring for the patient. The reduced minimum bed height assists the patient in getting up.
Width of the mattress platform
The choice of bed width offers the customer the opportunity to choose a variant that fully suits the bed positioning and mobility requirements, while providing maximum comfort for the patient.
The mattress holders ensure optimal positioning of the mattress when positioning the mattress platform.
Extension of the mattress platform
The mattress platform extension of up to 20 cm brings comfort even to taller patients.
They provide excellent protection for the patient against falls and ensure very good guidance of the bed during transport. Disinfection and maintenance are very easy due to the smooth surface and design of the boards. You can choose between metal frame with HPL filling or plastic boards.
Universal accessories holders
Two are located at the head board and two at the foot board. They allow the use of accessories such as: lifting pole and handle, IV pole, monitor holder, additional side rails, bedside lamp or extension kit.
Quick access to the patient
RRS (Rapid Remove System) head and foot board removal significantly speeds up patient access at critical moments.
Safe handling of the bed is ensured by a centrally operated brake. Easy operation via foot pedals accessible from both sides of the bed allows instant braking. Thanks to the possibility of locking the castors in the straight direction of travel, the bed can be easily operated by only one person during transport.
All PROMA REHA beds are equipped with TENTE branded castors. For this bed, it is possible to configure plastic castors with central brake or metal, independently braked castors.
Bed linen shelf
The pull-out shelf is a great tool for changing bed linen.
The mattress platform can be made of profiled metal slats or removable ABS plastic. The main advantages of these materials are their high resistance to chemicals used in the medical field, surface stability and resistance to wetting. The plastic loading surface is fully removable, which makes it easier to wash and disinfect.
Brings greater comfort to patients, reduces abdominal pressures and reduces the risk of decubitus.
Plastic chassis cover
Facilitates and speeds up daily cleaning of the bed. Protects the mechanisms and electrical circuits in the chassis, thus extending the life and reliability of the bed.
The solid and stable construction with a safe operating load of up to 250 kg provides safe support even when caring for patients with higher weight. Thanks to the materials and technologies used, extremely high durability is ensured even under repeated increased loads.
Removable and foldable siderails ensure patient safety. The easy folding of the siderails with two independent movements significantly reduces the risk of accidental folding. The folded bedrails are positioned sufficiently below the mattress level to easily exit the bed.
Horizontal accessories holder
The standardised stainless steel euro rail for hanging accessories is equipped with three universal plastic hooks on both sides of the bed.
The bumper wheels located at the four corners of the bed are a great help especially during transport.
|Mattress platform (length x width)||200 x 85 (90) cm|
|Outer bed dimensions with bumper wheels
(length x width)
|214 x 97 (102) cm|
|Mattress platform height||39,5 - 78,5 cm|
|Autoregression back part||12 cm|
|Autoregression thigh part||6 cm|
|Mattress platform extension||20 cm|
|Weight of the bed||125 kg|
|Safe operating load of the bed||250 kg|
|Maximum patient weight||215 kg|
|CPR back part||Yes|
|Application environment for bed use||2, 3|
|Mattress platform parts - metal slats||Yes (optional)|
|Mattress platform parts - removable plastic||Yes (optional)|
|Type of boards - metal with HPL||Yes (optional)|
|Type of boards - plastic||Yes (optional)|
|Type of siderails||Foldable metal siderails - 4 tubes|
|Trendelenburg / Antitrendelenburg||15° / 14° (mechanical)|
|Max. angles of adjustable sections - back part||70°|
|Max. angles of adjustable sections - thigh part||40°|
|Max. angles of adjustable sections - calf part||25° (rastomat)|
|Castors||Metal, plastic (optional)|
|Central brake||Yes (optional)|
|Horizontal accessory holder||Yes 2x (optional)|
|Plastic hook||Yes 6x (optional)|
|Plastic chassis cover||Yes (optional)|
|Universal accessory holder||Yes 4x|
|Bed linen shelf||Yes (optional)|
|Aretation of bedheads||Yes|
|Recommended mattress (lenght x weight)||200 x 85 (90) cm|
|Mattress thickness in normal using||14 cm|
|Recommended minimal mattress size||12 cm|
|Recommended maximal mattress size||22 cm|